Yingchuang 3D printing cycle industry expo garden launched on Sep.15!

Whether it is cities, steel mills, coal chemicals, power plant solid waste, or desert sand.. All of them will enter the "Yingchuang 3D printing recycling industry expo garden" which will be launched on September 15 and become 3D printing "ink" resources to achieve beautiful countryside, beautiful scenery and beautiful China.

Does the rubbish need to separate? Where are the river fish? Is industrial waste still to be buried...Only green can make life dance, only technology can make ecology environmental protection. China has waged the biggest battle of green mountains and rivers in history.

The Yingchuang 3D printing recycling industrial park, which will be launched on September 15, 2018, will make rural revitalization, people's benefit project and sponge city construction more beautiful due to more ecological conditions, and make the construction of coastline, riverbank line, transportation and power facilities more attractive due to more science and technology. The large-scale application of construction technology of Yingchuang 3D printing will set off the largest "life community" defense war in history. This is also why four prime ministers have been concerned about Yingchuang Building Technique ( Shanghai) Co.,Ltd.

Vice premier Han Zheng

Yingchuang 3D printing architecture should be industrialized as soon as possible

On August 13, 2014, Han Zheng, deputy premier of the state council and deputy secretary of the party group of the CPC central committee, visited Zhangjiang Qingpu park in Shanghai, where Yingchuang company is located, to inspect the "3D printing building" when he was the party secretary of Shanghai. When seeing that no mines are opened and no environment is damaged, the 3D printing "ink" technology first developed in the world can be used to print the integrated ecological and energy-saving buildings continuously and efficiently, he said, Yingchuang should industrialize its new technological achievements as soon as possible so that the achievements will eventually become widely accepted commodities in the market. 

Vice premier Li lanqing

Yingchuang 3D printed buildings should be used by the city

Li Lanqing, an 84-year-old former member of the standing committee of the political bureau of the central committee of the communist party of China (CPC) central committee and former vice premier of the state council, visits the factory of Yingchuang in Suzhou on May 2, 2016. "I'd like to introduce you to shenzhen and eat the construction waste," he says, when he sees that the world's leading 3D printing construction technology can replace human labor with machines and that the printer's sprinkler can sift and separate the removed construction waste for reuse.

On December 20, 2015, a major "man-made" disaster occurred in Hengtaiyu industrial park, phoenix community of Guangming new district, Shenzhen city, Guangdong province, which caused the whole park to be engulfed with loss of life and property. People turned a disused mountain-splitting quarry into a mud-receiving field, and in a completely disordered state, the mud-dirt waste pulled from the city was accepted uncontrollably until it collapsed beyond the mountain's endurance limit... Vice premier Li Lanqing was pleased to see that Yingchuang's 3D printing construction technology could separate and reuse the soil.

Former Australian prime minister Tony abbott

Looking forward to living in a 3D printing villa

On dec 12, 2016, former Australian prime minister Tony Abbott met with the chairman of Yingchuang, Mr. Ma Yihe, and praised the technology of Yingchuang 3D printing. It said that it will support the promotion and application of Yingchuang 3D printing technology in Australia, looking forward to living in the villa of Yingchuang 3D printing.

Vice premier Zhang Gaoli

Promote the development of national standards for new technologies

Chairman Zhao Baige submitted a proposal on 3D printed construction technology to the state council, which was approved by Zhang Gaoli, former vice premier of the state council and a member of the standing committee of the political bureau of the CPC central committee

In May 2017, Zhao Baige, a member of the standing committee of the National People's Congress, vice chairman of the foreign affairs committee of the National People's Congress, and chairman of the Landi international think tank project expert committee of the Chinese academy of social sciences, said in the foreword of the book "a city in 3D printing", “ The raw materials of 3D printing construction 'ink' can be taken from solid wastes such as cities, buildings, mines and steel mills to regenerate resources; Dry construction can avoid the impact of construction dust and noise, and achieve the goal of energy conservation and environmental protection, resource regeneration and environmental improvement, providing support for the green construction of 'One Belt And One Road' country. In terms of urban infrastructure and the application of "sponge city", the 3D printing construction technology, through the use of 3D printing construction wall and the matching of intelligent drip irrigation system, highlights the advantages of rapid construction of structures, low construction cost and light and natural structure. President Zhao baige, who has seen Yingchuang's Suzhou factory, wants to establish national standards for 3D printing construction technology as soon as possible to serve the "One Belt And One Road" national proposal submitted to the state council. Zhang Gaoli, a member of the standing committee of the political bureau of the CPC central committee and former vice premier of the state council, approved the proposal to relevant ministries and commissions to promote the accelerated industrialization of green and ecological technologies.

On "One Belt And One Road" industrial cooperation international forum on May 15, 2017, Yingchuang 3D printing construction technology became the "One Belt And One Road" countries' favorite project for cooperation due to green and sustainable development. 

“ 3D prints a city” introduced, “ 3D printing technology has been ranked as the first of the ten technologies that will change the world in the future, and has been regarded as the innovative technology that triggered the third industrial revolution. However, at present, international 3D printing construction technology is generally in the stage of experimental research and development, and there are no specific commercial printing cases. At present, Yingchuang has the technologies and contents of the key links such as spraying construction equipment, printing materials, construction technology and actual printing of building application cases for 3D printing buildings and already has the ability to print out truly habitable buildings and is moving into the field of global technology standardization.” It is reported that the media reported that the United States in 2017 predicted the world 10 years later “...... In China, Yingchuang has already built a six-story office building using 3D printing, and it expects 10% of its products to be made with 3D printing equipment by 2027.” This is the pride of China's innovation leading the world!

"Major heavy equipment photography exhibition" (1)

Yingchuang Suzhou 3D printing architecture exhibition area

On August 19, 2017, "the great power organ -- a photographic exhibition to welcome the 19th victory of the party" was held on August 19, 2017. Yingchuang has created China's first 3D printing construction machine that successfully prints the living houses. It was displayed on the same stage with large domestic aircraft C919 and mozi scientific experiment satellite, which further proved that China's construction science and technology has become one of the most advanced in the world.

"Major heavy equipment photography exhibition" (2)

Construction printing process of yingchuang 3D printing

It has been four years since vice premier Han Zheng arrived at Yingchuang. Yingchuang has been practicing the prime minister's instructions and accelerating the industrialization application of 3D printing architectural technology. The rural revitalization, benefit the people project, sponge city construction began to show the scientific and technological innovation changes the world power. A 3D-printed bus station at the Zhangjiang Jinshan park in Shanghai was broadcast on CCTV news. Mobile 3d-printed buildings have flown out of the sea. The 3D printed coastal ecological project won the prize in Hong Kong, and a number of beautiful "maker sharing houses" are serving innovative entrepreneurs in high-tech zones and technology parks...

Yingchuang 3D printing Shared house

Yingchuang 3D printing bus station

Yingchuang 3D printing day-day up custom house

Yingchuang 3D printing green houses that can be planted

Yingchuang 3D printing construction technology makes solid waste no longer buried, but accelerated the relay. Yingchuang plans to release 1 million Shared houses, 1 million Internet eco-toilets and "ant Ant Didi" platform of Internet +3D printing construction technology in three years, bringing together designers from around the world and changing many available resources for wider application. Whether it is cities, steel mills, coal chemicals, power plant solid waste, or desert sand.. All of them will enter the "Yingchuang 3D printing recycling industry expo garden" which will be launched on September 15 and become 3D printing "ink" resources to achieve beautiful countryside, beautiful scenery and beautiful China. Baosteel, Shasteel and Yonggang, both well-known at home and abroad, have taken the lead in becoming a link in the 3D printing cycle industry chain, transforming industrial waste steel slag into treasure, and joining hands to restore the sustainable development of a living community.  

Yingchuang 3D printing architecture classic case

Yingchuang 3D printing government office -- finished within 7 days

Yingchuang 3D printing 6-story building project -- five floors above ground and one floor below ground

Yingchuang 3D printing irregular building

Yingchuang 3D printing 1100㎡luxury villa project -- Internal and external integrated printing

Yingchuang 3D printing Chinese classical courtyard project

Yingchuang 3D printing APEC summit -- Lianxi Annexe Wall

Yingchuang Nahe prairie 3D printing shared houses

Yingchuang 3D printing day-day up custom house

3D printing multi-functional noise reduction green wall

3D printing multi-functional noise reduction green wall

3D printing municipal project -- Underground pipe gallery

3D printing municipal project -- Bus station

3D printing ecology project -- Ecological coastline

3D printing fish and vegetables -- Planting wall series

Scan QR code to learn more 3D printed buildings